The system currently has the following components:
- PC with
- Asus TUV4X Socket-370 ATX motherboard
(133MHz FSB, 6 32-bit 33-MHz PCI slots, 1 parallel, 2 serial, 2+2 USB ports)
- 1.1GHz Intel Celeron CPU
- 8mm SCSI tape drive
- Measurement Computing PCI-DAS 6023 A/D board (for slow signals)
- National Instruments PCI-GPIB interface card
and GPIB-over-fiber extenders
(to communicate with equipment in experimental hall or refrigerator room >100m away)
- Tekram DC135U PCI narrow ultra SCSI adapter (for tape and CAMAC interface)
- CAMAC crate with
- Wiener CC-USB USB CAMAC crate controller
- Interface Standards DTM-399 Dataway test module
- Jorway 41 12-bit NIM output register
- Jorway 65 12-bit NIM input register
- LeCroy 2301 qVt interface (for detector calibration with radioactive sources)
- LeCroy 4222 quad gate/delay generator
- LeCroy 2323 dual gate/delay generator
- Phillips 7106 16-channel discriminator
- LeCroy 2340B 16-channel discriminator coincidence register
- LeCroy 2249A 12-channel 10-bit ADC
- LeCroy 2249SG 12-channel 10-bit separate-gate ADC
- LeCroy 2259A 12-channel 11-bit peak-sensing ADC
- Ortec AD413A
quad 13-bit peak ADC and
HM413 MCA
- LeCroy 2551 6-channel 48-bit 100MHz scaler
- LeCroy 4208 8-channel 23-bit TDC
- LeCroy 2262 quad 10-bit 40MHz waveform digitizer (for recording rf envelopes)
- 2 NIM bins with
- LeCroy 428F fan-in/out modules
- LeCroy 623 and
621BL
discriminators
- Phillips 726 ECL/NIM/TTL translators
- LeCroy 3001 qVt
- Fermi RFD-VS visual scalers
|
 |